The Sniper Stealth 4150 EFI system from Holley features 4, 100LB/HR Fuel Injectors capable of supporting up to 650 HP naturally aspirated or 600 HP on forced induction applications. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. Part # 34-42 is required for a bolt-in installation.

Features:

  • Bolt on 4150 Flange Carburetor Replacement
  • Throttle body mounted ECU – no extra boxes to mount
  • Supports up to 650hp with Four 100 Lb/Hr Injectors!
  • All of the wiring exits below the rear fuel injector cover, for a completely stealth installation.
  • Timed spark part for vacuum advanced distributors located under the front fuel bowl, for easy access to the distributor.
  • Air entry is machined to fit most stock style air cleaners with air cleaner locator provisions.
  • Only 4 Wiring Connections Required! (Battery +, Battery - , Switched Ignition & RPM)
  • External fuel pressure regulator required, set to a base pressure of 58.5 PSI, such as 12-886.
  • Integrated ignition timing control
  • High Resolution Full Color Touchscreen for Initial Setup, Tuning, and Gauge Displays
  • Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required!
  • Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI!
  • The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn!
  • OEM Style TPS/IAC and Fuel Pressure regulator, for years of dependable service.
  • Included clamp-on oxygen sensor kit for 2.25" exhaust ensures a leak free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange
  • vailable in 3 finishes: Shiny, Black and coming soon, Gold

Sniper EFI Stealth 4150 Master Kit

SKU: 550-870K
$2,000.00Price
  • Brand Holley Sniper EFI
    CFM 870
    Emission Code 3
    Finish Shiny
    Flange Style 4150
    Fuel Pressure 58.5 PSI
    Height 3.28"
    Injector Size 100 lb/hr @ 58.5 PSI
    Inlet / Outlet Size 3/4-16 Female O-Ring (AN 8)
    MAP Sensor 2Bar
    Max Horsepower Rating 650 Naturally Aspirated
    Model 4150 EFI Conversion Throttle Body
    Product Type EFI
    Transmission 700R4/200R4
      Ford C4/C6
      TH350
    Part Number 550-870K
  • This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

    The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

    • 1965 and older U.S. manufactured California Certified vehicles
    • 1967 and older U.S. manufactured Federally Certified vehicles
    • 1967 and older Foreign manufactured vehicle

    The following vehicles are considered Racing Use Only Vehicles:

    • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

    WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

    The following vehicles are considered Emissions Controlled Vehicles:

    • 1966 and newer U.S. manufactured California Certified vehicles
    • 1968 and newer U.S. manufactured Federally Certified vehicles
    • 1968 and newer Foreign manufactured vehicle